Tag archive: baseline
Barry Barish | 1 September 2011
As part of the process of developing the ILC technical design, the GDE project managers have initiated a set of technical baseline reviews of major subsystems. The first of those reviews on the ILC damping rings was carried out in July in Frascati, Italy.
Category:
Director's Corner | Tagged:
baseline, damping ring, Frascati, ILC baseline, TDR, Technical Design Report
Ewan Paterson | 28 April 2011
The new ILC baseline shows the way to designing a linear collider that maintains original performance while using cost-saving alternatives.
Category:
Director's Corner | Tagged:
ALCPG11, baseline, ILC baseline, Technical Design Phase, top level change control
Nick Walker | 27 January 2011
The SLAC BAW was the second and last such workshop of the so-called Top Level Change Control (TLCC) process, which has been going on for the last twelve months. The SLAC BAW focused on the two remaining TLCC themes: a reduced beam-power parameter set and the location and layout of the positron source.
Category:
Director's Corner | Tagged:
baseline, baseline assessment workshop, BAW, beam-power, ILC baseline, positron source, SLAC, TLCC, top level change control
Barry Barish | 2 December 2010
I have officially approved two major changes in the ILC baseline configuration for the next phase of our R&D and design work. [...] Today, I discuss the procedure we have followed to evaluate and decide on these changes.
Category:
Director's Corner | Tagged:
baseline, baseline configuration, ILC baseline
Ewan Paterson | 24 June 2010
In a new large accelerator complex which will take years to get approved and constructed, one must maintain some degree of flexibility in its design as many things can change before a construction start.
Category:
Director's Corner | Tagged:
baseline, baseline configuration, ILC baseline, ILC design, RDR baseline upgrade, SB2009
Barry Barish | 10 September 2009
(...) We are undergoing a process we refer to as Accelerator Design and Integration, from which we expect to make a number of important changes to the baseline for the ILC.
Category:
Director's Corner | Tagged:
baseline, ILC baseline
Barry Barish | 11 June 2009
... A new, more descriptive name for the process we are undertaking, Accelerator Design and Integration, became official at the first working meeting towards defining a new ILC baseline held at DESY from 28 to 29 May.
Category:
Director's Corner | Tagged:
accelerator design and integration, AD&I, baseline, ILC baseline
Barry Barish | 11 May 2006
One of the more difficult decisions we made last fall was which damping ring option to choose for our baseline. No recommendation came out of the Snowmass Workshop and our damping ring working group continued to study the question through much of the fall.
Category:
Director's Corner | Tagged:
baseline, damping ring, ILC baseline
Elizabeth Clements | 5 January 2006
Last month in Frascati, GDE Director Barry Barish announced the establishment of the Design Cost Board with Fermilab's Peter Garbincius as chairperson. The primary role of this board is to oversee the preparation of the Reference Design Report, a document to be developed by the end of 2006, which will include a detailed design and cost estimate for the International Linear Collider.
Category:
Feature | Tagged:
baseline, change control board, design cost board, ILC baseline
Copyright © 2024 ILC International Development Team
